Set-up guide · for media volunteers
Set up your media desk
Biverse needs two things from the church: the preacher’s voice and a screen for the congregation. Here are the usual ways to connect both, from the simplest to the best.
1. Sound: let Biverse hear the preacher
Clear sound matters more than loud sound. Pick the best option you have; you can change it any time in Input, and the level meter beside it should jump when someone speaks.
-
Good
Laptop or USB microphone
Put it near a loudspeaker that carries the preacher’s voice, or near the pulpit. Keep it away from the drums, the keyboard amp and fans.
Costs nothing to try
-
Best
A feed from the sound desk
Ask the sound engineer for a spare aux send, matrix or record out that carries the pulpit microphone only (no music). Connect it to a USB audio interface and choose that in Biverse. Set the send so the meter sits mostly in the green.
Needs a USB audio interface (Behringer UCA202, Focusrite or similar)
-
Already on the computer
Livestream or video audio
If the sermon is already playing on the computer: Stereo Mix or VB-Cable on Windows, BlackHole on a Mac. The user guide has the clicks.
Free virtual audio drivers
Don’t plug a mixer’s line output into a laptop’s microphone socket. It is far too loud and will distort. Use a USB audio interface.
2. Screen: show the verse to the congregation
- Connect the projector or TV to the laptop (HDMI or VGA).
- Set it as an extended display, not mirrored: Windows + P → Extend on Windows; System Settings → Displays on a Mac.
- In Biverse, pick it under Output and press Show output. The projector goes black until a verse goes live.
- Press Output → Test output to check the colours and the font size from the back of the hall.
3. With your presentation software or livestream
Biverse does scripture only. Most churches keep what they already use for songs and announcements and add Biverse beside it. Three common layouts:
- Two computers
- The simplest. One laptop runs your presentation software, a second runs Biverse. Switch the projector between them with an HDMI switch, or give Biverse its own TV screens.
- One computer, take turns
- Both programs run on the same laptop with the projector as a second screen. Show Biverse’s output for the sermon and hide it (Hide output) when it’s time for songs.
- OBS, vMix or a livestream
- Turn on Settings → NDI. Biverse then sends the live slide over the church network, with no capture card or extra HDMI cable. In OBS add an NDI Source and pick “COMPUTER (Biverse)”; in vMix add it as an input. Choose Lower third to show the verse over the camera with the rest see-through, no chroma key needed. Both computers must be on the same network.
- OBS without NDI
- Add a Window Capture (Windows) or macOS Screen Capture source in OBS and choose the Biverse output window. Put it in its own scene, or crop it for a lower third. Use this on the Windows 7 and 8 downloads, or a Mac older than macOS 13.
4. Before Sunday: a five-minute check
- Start Biverse and wait until it no longer says “Loading speech model…”.
- Check Input, Output and Bible.
- Press Listen and have someone at the pulpit say “John chapter three verse sixteen”. It should appear in Preview within about a second.
- Decide on Manual (you press GO LIVE) or Auto (verses go straight up). New teams usually start with Manual.
- Know your three keys: Ctrl+Enter (Cmd+Enter on a Mac) or F5 to go live, Esc to blank, → for the next verse.
Everything else, every button and setting, is in the documentation.